No supplier
Viewed products
Datapath VisionAV-SDI is a video...
DTH-0017
Datapath VisionAV-SDI is a video capture card with three independent channels of video capture for 3G SDI, DVI and Composite video
CONFIRM STOCK AVAILABILITY BEFORE ORDERING ONLINE
Datapath VisionAV-SDI Capture Card with three indipendent channels of video and full analogue and digital auidio support.
This video capture capture cards are ideal for medical, lecture capture, web casting and video conferencing.
The VisionAV-SDI video capture card is a four lane PCI EXpress card with three inputs:
Thanks to indipendents channels the card can captures simulteneously three indipendent videos; also adds multiple channels of audio capture manageable through software. You can embedded audio capture from the SDI signal (balanced and unbalanced analogue).
In adds, this video capture card allows to integrate with four, eight and 16 lane motherboard connectors.
If you need further information please contact our commercial office at sales@interact.it or call +39-06-58318301
| Board format | PCI Express x4 half size plug-in card, 110mm x 170mm |
| Connectors (main board) | DVI-I, RCA and 2 x BNC connector: Input (Green LED) and Loop through output (Blue LED) |
| HDMI capture | Supports HDMI 1.3 to 225 MHz (inlcuding deep colour modes) For HDCP support, contact the Sales department for more information HDMI audio can be selected as source for audio streaming Incorporates TMDS equaliser to support up to 20m cables |
| DVI capture | Supports DVI 1.0 RGB 24bit capture to 165MHz Incorporates TMDS equaliser to support up to 20m cables |
| VGA/ YPbPr Capture | Triple ADCs sampling up to 170Msps. Full 4:4:4 sampling, 8bits per colour 5-wire, 4-wire or sync-on-green signal format |
| DVI-I modes | 1920 x 1200/ 60fps. 32 bit colour, up to 4096 x 4096 resolution |
| Composite video capture | CCIR601 sampling, PAL, NTSC, SECAM formats automatically detected |
| SDI capture | SD-SDI (480i/ 576i), HD-SDI to 1080i, 3G-SDI up too 1080p and 2k Digital cinema modes SDI audio can be selected as source for audio streaming |
| Analogue audio capture | Balanced and unbalanced analogue Audio capture (through optional Audio Module) |
| Video capture memory | 256MB high bandwidth frame buffer supports triple buffering of HD and SD video Local storage of complex scatter-gather tables for DMA engine (elimintates read overhead) |
| Video processing | Polyphase FIR scaling engine (7x5) for hardware downscaling and upscaling Colour space conversion allows captured data to be transferred in any format:
|
| DMA engine | Direct DMA to physical or virtual memory buffers with full scatter-gather support DMA bandwidth: up to 800MB/s 16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters |
| Operating system support | Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7, Windows 8 and Linux support (not audio*) See www.datapath.co.uk for updates |
| Power requirements | Max current at 12V - 1A Max current at 3.3V - 1A Thermal dissipation - 15.5 W |
| Operating temperature | 0 to 35 °C (32 to 96°F) |
| Storage temperature | -20 to 70 °C (-4 to 158 °F) |
| Relative humidity | 5% to 90% non-condensing |
| Warranty | 3 years |
Downloads and Drivers
Four lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth
Triple channel PCI Express capture card
Channel 1 - a High Defintion DVI-I capture channel
HDMI/ DVI/ TGB/ YPbPr video capture
HDMI embedded Audio Capture and streaming
Low input to output capture latency
Channel 2 - a Standard Definition Composite capture channel:
Channel 3 - a SDI capture channel:
Direct DMA to graphics memory of third party graphics cards
All standard features of the Vision range of capture cards
Driver support included within the Datapath unified Windows driver
Driver support included with the Datapath unified Linux driver
