Minrray VA200 unified communications system
RovoRx-SDI Receiver to 6G/3G-SDI




No supplier

Viewed products

RovoRx-HDMI Receiver


AJA RovoRx-HDMI UltraHD/HD HDBaseT Receiver to HDMI with PoH

More details


610,00 € VAT included

Add to wishlist

More info

AJA RovoRx-HDMI is an UltraHD/HD HDBaseT receiver with integrated HDMI video and audio outputs specifically designed to receive RovoCam’s output. Receive the RovoCam’s video and audio up to 100m away from the camera, and output to HDMI TVs and devices, while also providing power back to the camera. RovoRX-HDMI is also suitable for use with compatible HDBaseT 3rd party devices providing support for uncompressed video, audio, power, and control, all over a single Cat 5e/6 cable, greatly simplifying cabling and systems integration.

AJA RovoRx-HDMI main features

  • 1x UltraHD/HD HDMI output
  • 1x RCA stereo audio output*
  • 1x USB for signal extension
  • 1x RS-232 for RovoCam control or VISCA support
  • 1x HDBaseT connector (RJ-45) 

*RovCam Audio is not carried over to the HDMI output on

RovoRx-HDMI, it is only output via the RCA 2 channel connection.

AJA RovoRx-HDMI offers a lot of power for HDBaseT workflows, receiving uncompressed video and audio, offering bidirectional VISCA support and PoH for powering RovoCam, all across a single Cat 5e/6 cable. With an HDMI outpt, your options for distribution of RovoCam's UltraHD or HD imagery simplify any project's needs.

  • HDBaseT (RJ-45), Analog Video reference terminating Input
  • 1x HDMI 1.4 Output
  • 1x RCA Stereo Output
  • 1x REF In/Out 
  • 1x 3.5mm TRS Input for RS-232 bidirectional signals
  • 1x RS232 for RovoControl software


Video Formats
  • (4K) 4096 x 2160p 50, 59.94, 60 (8-bit 4:2:0)
  • (4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30
  • (UltraHD) 3840 x 2160p 50, 59.94, 60 (8-bit 4:2:0)
  • (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30
  • (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
  • (HD) 1080p 23.98, 24, 25, 29.97, 50, 59.94, 60
  • (HD) 1080i 25, 29.97
  • (HD) 720p 25, 29.97, 50, 59.94, 60
  • (SD) 625i
  • (SD) 525i
*Wide range of VESA formats supported for pass through see associated chart on VESA formats.
Video InputHDBaseT (RJ-45)
Video Output
  • HDMI 1.4b
Audio Output Digital
  • 8-Channels (4 pairs) of HDMI embedded audio supported
  • Rates supported: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, and 96 kHz
Audio Output Analog

2 x RCA connectors, 2-channel unbalanced

*This feature only works when used in conjunction with RovoCam

RS-2321 x 3.5mm TRS Input for RS-232 bidirectional signals
User InterfaceAJA Control Software
USB1 x USB for firmware and additional control
Size (w x d x h)4.03” x 5.2” x 0.94” (102.4mm x 132mm x 23.9mm)
Weight0.7 lbs (0.4 kg)

RovoRx-HDMI only: 48V @ 125mA = 6W typical, 48V @ 156mA = 7.5W max

RovoRx-HDMI powering RovoCam: 48V @ 271mA = 13W typical, 48V @ 312mA = 15W max

  • Safe Operating Temperature: 0 to 40 degrees C (32 to 104 degrees F)
  • Safe Storage Temperature (Power OFF): -40 to 60 degrees C (-40 to 140 degrees F)
  • Operating Relative Humidity: 10-90% noncondensing 
  • Operating Altitude: <3,000 meters (<10,000 feet)


Write a review

RovoRx-HDMI Receiver

RovoRx-HDMI Receiver

AJA RovoRx-HDMI UltraHD/HD HDBaseT Receiver to HDMI with PoH

Other products in the same category