The DEC-200 is a compact, low cost H.264 SD
CONFIRM STOCK AVAILABILITY BEFORE ORDERING ONLINE
Warning: Last items in stock!
Teracue DEC-200 is a compact, low cost H.264 SD and MPEG-2 SD IPTV decoder and receiver for decoding. It is designed for LAN and intranet network video applications. As an output point for streaming media, it provides easy access to professional DVB/DVD-quality streams. Decode streams with the DEC-200 to provide networking video and audio on standard TVs, LCDs, plasmas, monitors and on projectors.
The DEC-200 real-time decoder blades are robust 24/7 LIVE stream decoders for all types of operating conditions. The DEC- 200 supports RGB, Component, S-Video, Composite and SDI with embedded audio. All DEC-200 decoder blades process input streams in full DVB/ DVD-quality for professional output on any kind of display device.
DEC-200 combines high-performance with unparalleled simplicity in a compact Ethernet video decoding appliance designed for commercial, institutional, and industrial applications such as:
If you need further information please contact firstname.lastname@example.org or call +39-06-58318301
|DEC-200||H.264 SD and MPEG-2 SD decoder blade with analog video output and with SDI output, embedded audio supported.|
The BNC connector on the front panel can be configured as Composite output or as SDI output via jumper.
The DEC-200 is delivered with the BREAK-OUT cable S as standard.
Teracue also offers a professional BREAK-OUT cable P which must be ordered separately.
S YC (MiniDIN), CVBS (RCA plug), Analogue Audio In (MiniJack), Analogue Audio Out (RCA plug)
P RGB, Sync, YPBPR, YC, CVBS, Genlock, AES-3id (all BNC), Audio Out/In (RCA plug), GPI In/Out (Sub D 9pin), RS-232 (Sub D 9pin)
|Video Outputs||Composite: 1 VPP, 75 Ohm (BNC) or SDI Output: 0,8 VPP, 75 Ohm (BNC , embedded audio support); This can be configured via jumper|
Break-out cable outputs: Composite: 1 VPP, 75 Ohm
S-Video: 1 VPP (Y), 0,3 VPP (C - Pal), 0,286 VPP (C - NTSC), 75 Ohm
Component: 1 VPP (Y), 0,7 VPP (PBPR) , 75 Ohm
RGB: 0,7 VPP, 75 Ohm, Sync: 0,3 VPP
Genlock*: Blackburst 0,3 VPP, 75 Ohm
|Video Output Resolutions||Full D1: 720h x 480/576v, Half-D1: 352h x 480/576v, CIF/SIF: 360/384h x 288/240v, QCIF: 176h x 144/120v|
|Audio Outputs||Unbalanced Analog Stereo, Consumer Line level|
AES-3id, 75 Ohm, 1 VPP, Unbalanced
|Video Codecs||MPEG-2 (ISO/IEC 13818-2), Main Profile at Main Level (MP@ML), 4:2:0|
MPEG-4 AVC/H.264 (ISO/IEC 14496-10), Main Profile at Level 3.1 (MP@L3),
Baseline Profile at Level 3.1 (BP@L3), 4:2.0
|Stream types||ISO/IEC 13818-1 Transport Streams|
|Audio Codecs||MPEG-1 Audio Layer 1, 2 (ISO/IEC 11172-3 Layer 1, 2)|
MPEG-4 AAC LC (ISO/IEC 14496-3)
|Network||10/100TX Ethernet, RJ45, half/full duplex, Auto-sensing|
|Streaming traffic||Unicast and Multicast traffic supported|
|IP Protocols||HTTP (Web Browser), TCP/IP Control Protocol, UDP/IP Streaming, IGMPv2/3, SNMP*, RTP*, RTCP*, RTSP*, DHCP*|
|RS-232||port RS-232 connection via console (Remote control for non IP devices via TCP/IP RS-232 command tunnelling*)|
|GPI in*||1 INPUT, (for device control: Streaming on/off configuration*)|
|GPI out||1 OUTPUT, for switching peripheral devices on/off|
|Agency Approvals||CE, RoHS compliant|
|Humidity||Up to 90%, non-condensing|
|Temperature||0 to +60°C environment temperature; fanless when operated in FR-110 or FR-210 frames|
|Weight||Approx. 160 grams|
|Blade dimensions||(H/W/D) 20mm x 130mm x 190mm|
|Power||5W per blade|
|Limited Warranty||1 year standard limited warranty. Warranty extensions available.|
***PLEASE NOTE: Live streaming/Multicast Streaming requires specially designed and configured networks. Minimum Requirements include: Layer-3 Switched Ethernet, Multicast Enabled, IGMPv2/3, Network and Multicast Routing Supported. * = Will be supported in future firmware versions.
A high-quality network video/audio port
The DEC-200 provides versatile video/audio output in one simple and low-cost solution. Video-over-IP reception and DVB/DVD-quality processing of both H.264 and MPEG-2 SD streams are supported by the compact, flexible, yet robust and highly supportable DEC-200 blade-based appliance.
Easy to install and use
Installing and operating the DEC-200 is quick and simple: Connect LAN Ethernet and a display device and the DEC-200 decoder blade becomes a true video networking port. It is able to receive streams that are present on your network and to deliver them in full DVD-quality video to connected TVs, monitors, plasmas, projectors - simply any kind of display. When combined with the ENC encoder series or the DVB/IP videogateways the DEC-200 becomes part of a comprehensive real-time LIVE video transmission, collaboration, contribution, trunking, monitoring or publishing system.
Simple setup and maintenance
Configure and control through any standard web browser, no special tools required. Access the administrative interface and decoder configuration directly from your PC web browser to configure and start using the DEC-200. Full control via an intuitive graphical user interface.
Use the DEC-200 for LIVE video networking applications. Place the DEC-200 anywhere on the network to facilitate DVD-quality video viewing of camera signals, TV channels, monitoring feeds or any other standard H.264 SD and MPEG-2 SD streaming video and audio source on the network.
TALKBACK audio conferencing, integrated COM server* and GPIO
The DEC-200 supports TALKBACK. This allows audio conferencing between ENC encoder and DEC decoder series. Additionally remote control of peripheral serial equipment through its integrated RS-232 port*. The GPIO interface enables basic remote control of the DEC-200, e.g. switching devices on/off
Extremely robust and durable
The DEC-200 runs on an embedded Linux platform. This blade is designed without any moving parts, as hard drives/fans, to ensure system uptime, reliability and noiseless operation. The DEC-200 can be used in extreme operating conditions and at temperatures up to max. 60° C.
Blade based operation
The DEC-200 blades are operated inside the FR chassis series. Blades can be used in a single channel chassis (FR-110, as shown above) or in the FR-210 dual channel chassis. Highdensity requirements are solved by operating the DEC blades in the FR-2000 multi-channel rack, which can hold up to max. 21 Teracue blades. Different types of DEC decoder blades, ENC encoder blades and DVB/IP videogateways can be mixed and matched in the FR-2000 frame.
No customer reviews for the moment.